SD Manual clutch

Reducer can be used in conjunction with the pneumatic device for the 90-degree turn of the butterfly valves, plug valves and other manual or pneumatic drive to achieve.

    
      1, small size, light weight, reasonable design, novel style;
      2, the product series, the output torque and pneumatic devices, a variety of valves matching;
      3, worm hole connecting the two are separated by a 90-degree keyway so that users need to select the device with the valve according to the relative position;
      4, are free to switch manual and pneumatic: Did limit sales, rotating eccentric device 180 degrees, the limit automatically limit sales to achieve aerodynamic; the contrary, the realization of manual;
      5, the product factory, equipped with a special grease, and valve assembly, the overall seal, dust-proof and waterproof.
      6, protection grade IP65.
    
Help
      1, bottom reducer to connect with the valve, stent surface and the cylinder connected to valve shaft and worm gear through the inner hole with the valve shaft square hole with the Quartet and the cylinder; (work process: pneumatic valve when the cylinder drive shaft, worm gear with the switch . manually when the worm and worm gear to drive valve shaft rotation, the cylinder piston moving in tandem.
      Second, turn the handle (outer turn 180 degrees) in the close the worm, it will appear the phenomenon of top gear, will have to turn round a point of view can be combined hands-on;
      Third, reducer stent covered with three kinds of, the user can choose according to need, configure different types of cylinder;
      4, pneumatic and manual can not simultaneously drive.